Articles

Crystal Finials from Iron Art by Orion

In Drapery, Iron Art by Orion, Uncategorized on September 29, 2012 by sdeidt

What a sparkle from this Crystal Finial from Iron Art by Orion’s Bohemia Collection.

Our client designed this guest bedroom with their client’s grandchildren in mind

For more photos of our work visit Pacific Coast Drapery  for the Iron Art by Orion Catalog click here.
You can always reach us at 714-777-8262 or come by our offices at 1301 N. Hancock in Anaheim.

Advertisements

Articles

Custom shade solution for peaked roofs.

In Shades, Uncategorized, Window Coverings on November 10, 2011 by sdeidt Tagged: , , , , , , , , ,

One of the toughest windows to treat, the slanted window into a peaked roof.

Where do you start.  The windows are always tall, They let in a lot of light and often make privacy impossible.  Up till now the only satisfactory way to address this has been to install a stationary treatment on the angled portion essentially defeating the purpose of the window entirely.

Recently a client proposed we convert a woven wood shade they had  into a bottom up angle topped shade.  (Whew what a mouthful.)

At first I was skeptical.  Would it lay down right.  How to raise it evenly.  Could we even cut the weave on the angle without it fraying.  Soon the answers came.  Yes, yes and yes again.  Here is a photo taken in our workroom.

Eureka, the angle top woven wood is born.

The video of the shade installed is here on you tube.

http://www.youtube.com/watch?v=JPB2nZjvbXQ

The toughest part was learning how to put it all together.  Now that we’ve done it our seamstresses and installers have the details down pat and ready to manufacture.

Give Pacific Coast a call  at 714-777-8262 or email us at info@pacificcoastdrapery.com regarding how to treat  your most difficult design challenges.

Articles

Arched windows – Know your options

In Drapery, Uncategorized, Window Coverings on October 11, 2011 by sdeidt Tagged: , , , , , , , , , ,

Over the years clients are often faced with a dilemma.  Preserve the arched window or ignore it.  The design you choose greatly effects the cost of the treatment.  What is the right balance between style and cost?  Every Interior Designers toughest dilemma. 

In addressing any problem knowing your options is the best place to start.   Generally there are three options when it comes to arched window.  First and foremost one of the easiest solutions is to ignore the arch.  With the trend towards simple panels mounted on decorative hardware the designer seeks to frame the window with  fabric,  preserving the curved nature of the window.   The major choice in this instance is what style hardware, short rods pointing to the arch or long rods across the top.  One can even mount the treatment on an iron frame or tie back holders depending on the look you want to achieve.

This slideshow requires JavaScript.

The second alternative is to shape the top of the panel  to accent the arch.  Then either using a curved rod or tie back holders mounted on an angle we accent the curved window.  The easiest way to achieve this is by making a soft header which droops between the posts.  Breaking the treatment on the floor to adjust for the differences in height from one side to the other helps

The third method costs the most but is often the only way to treat the arch.  This approach involves creating an arch at the top or as is often easier the bottom of the treatment.  By repeating the dimension of the arch or creating an entirely new curve we replace the original arch with our own.    Obviously shaping the fabric, wood, or metal involves more labor .  We generally find that treatments with some horizontal fullness are the easiest and therefore least expensive of this variety.since fabric rarely lays flat across a curved surface.

Occasionally a client needs to add an arch to a straight treatment.  In the slideshow you can see where we provided our client used a curved wrought iron rod from Iron Art by Orion.  Now instead of seeing a standard window, the drapery rod is now the arch.  The cost of doing this is significantly less than the cost of installing an arched window.

Ultimately the key to successfully treating arched windows however lies in the skill of your workroom.  Many drapery manufacturers claim to be able to create window treatments like this.  Actually doing it is another thing altogether.   Why risk thousands of dollars in fabric and materials on unproven solutions when Pacific Coast has been doing this for over 30 years .

Articles

Motorized Shades in a corner

In Automation, Drapery, Shades, Somfy, Window Coverings on September 23, 2011 by sdeidt Tagged: , , , , , , , , , , , , , , , ,

This slideshow requires JavaScript.

We are often faced with specialty windows where form and function dictate what we do.  The window below was in a corner facing Pacific Coast Highway.  Our client wanted to maintain the view for her customers but enable them to have privacy and to cut the light on bright days..

Before the home was remodeled. Note the overall height and seamless corner.The face fabric was a hand-painted linen sheer with a horizontal pattern that needed be centered on each space in the shade.  On top of this all of the treatments needed to be automated.  Obviously a tough window but as you can see below the results were stunning. In this view the swag shades are part way down with the roller shades set at the same length.The shades are raised with the blackout roller shades installed behind fully recessed.

These treatments were automated with a combination of Somfy Sonness 30 and 50 motors.  At the back we used low voltage Sonnesse 30’s and then the roman shades utilize the Sonnesse 50.   By installing them in an over under configuration behind a flap of blacked out fabric we were able to fit this in less than 6″ of overall depth.  The window treatments were all integrated into their home automation system and are controlled by both the Somfy remotes and the Crestron controls in the house.

Articles

A New Beginning

In Uncategorized on September 20, 2011 by sdeidt

Here at Pacific Coast we’ve been looking for ways to communicate with our customers about what is going on in the industry.  This is a new start on getting photos of our work, products we like, ways to improve treatments, and generally anything related to window covering design, manufacture and installation.  Hopefully it will enable you to improve the products provided to you and your client’s.  To start with here is a link to our website.  www.pacificcoastdrapery.com